Be Right Back, Uninstalling
The "Fuck my life" thread - Printable Version

+- Be Right Back, Uninstalling (https://www.brbuninstalling.com)
+-- Forum: General Category (https://www.brbuninstalling.com/forumdisplay.php?fid=49)
+--- Forum: General Discussion (https://www.brbuninstalling.com/forumdisplay.php?fid=59)
+--- Thread: The "Fuck my life" thread (/showthread.php?tid=10758)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533


Re: The "Fuck my life" thread - KarthXLR - 05-07-2011

(05-07-2011, 03:57 PM)Käse link Wrote: [quote author=Ensign Epic link=topic=3709.msg205675#msg205675 date=1304800109]
[quote author=Käse link=topic=3709.msg205595#msg205595 date=1304745268]
[quote author=Ensign Epic link=topic=3709.msg205591#msg205591 date=1304744091]
[quote author=Käse link=topic=3709.msg205530#msg205530 date=1304715689]
[quote author=Ensign Epic link=topic=3709.msg205516#msg205516 date=1304707297]
[quote author=Vlambo link=topic=3709.msg205497#msg205497 date=1304694097]
[quote author=Käse link=topic=3709.msg205473#msg205473 date=1304657630]
I've had this massive headache for a few hours now, and I've already taken 3 Advil pills with little relief.
And I can't balance this damn redox equation:

1 ClO3- 1 Cl2 + 3 O2

Course, I don't remember chemistry
[/quote]

Uneven amount of Cl and O; 2 ClO3- 1 Cl2 + 3 O2
[/quote]

It's actually

2H+ + 2ClO3- Cl2 + (5/2)O2 + H2O

The charges need to be balanced. Oh well, I still haven't figured it out so I'm going to ask my TA tomorrow.
[/quote]

ffs dude give me the whole of the equation then; i barely passed chem this semester
[/quote]
What.
The original unbalanced redox rxn was the first one I posted. The most recently posted rxn is the fully balanced answer, which I can not get because I am stuck at this one step of adding electrons to the oxidation half rxn.
[/quote]

you gave me only bits of the equation first, give the whole of the equation when you want it done ffs man
4H+ + 4ClO3- 2Cl2 + 5O2 + 2H2O
is the answer; 104 electrons on both sides; 4H, 4Cl, 12O on all sides
[/quote]

I think you misunderstood what I meant.
1 ClO3- 1 Cl2 + 3 O2  is the complete (unbalanced) rxn.
2H+ + 2ClO3- Cl2 + (5/2)O2 + H2O  is the correct (balanced) answer not what you had posted earlier, which was 2 ClO3- 1 Cl2 + 3 O2. And 4H+ + 4ClO3- 2Cl2 + 5O2 + 2H2O is just the correct answer multiplied by 2...which is redundant.

But I figured out how to get to the answer so all is well in the world.

[/quote]
[Image: nerds1.jpg]

NEEEEERRRRRRDDDDDDDS


Re: The "Fuck my life" thread - Stein - 05-07-2011

(05-07-2011, 03:57 PM)Käse link Wrote: [quote author=Ensign Epic link=topic=3709.msg205675#msg205675 date=1304800109]
[quote author=Käse link=topic=3709.msg205595#msg205595 date=1304745268]
[quote author=Ensign Epic link=topic=3709.msg205591#msg205591 date=1304744091]
[quote author=Käse link=topic=3709.msg205530#msg205530 date=1304715689]
[quote author=Ensign Epic link=topic=3709.msg205516#msg205516 date=1304707297]
[quote author=Vlambo link=topic=3709.msg205497#msg205497 date=1304694097]
[quote author=Käse link=topic=3709.msg205473#msg205473 date=1304657630]
I've had this massive headache for a few hours now, and I've already taken 3 Advil pills with little relief.
And I can't balance this damn redox equation:

1 ClO3- 1 Cl2 + 3 O2

Course, I don't remember chemistry
[/quote]

Uneven amount of Cl and O; 2 ClO3- 1 Cl2 + 3 O2
[/quote]

It's actually

2H+ + 2ClO3- Cl2 + (5/2)O2 + H2O

The charges need to be balanced. Oh well, I still haven't figured it out so I'm going to ask my TA tomorrow.
[/quote]

ffs dude give me the whole of the equation then; i barely passed chem this semester
[/quote]
What.
The original unbalanced redox rxn was the first one I posted. The most recently posted rxn is the fully balanced answer, which I can not get because I am stuck at this one step of adding electrons to the oxidation half rxn.
[/quote]

you gave me only bits of the equation first, give the whole of the equation when you want it done ffs man
4H+ + 4ClO3- 2Cl2 + 5O2 + 2H2O
is the answer; 104 electrons on both sides; 4H, 4Cl, 12O on all sides
[/quote]

I think you misunderstood what I meant.
1 ClO3- 1 Cl2 + 3 O2  is the complete (unbalanced) rxn.
2H+ + 2ClO3- Cl2 + (5/2)O2 + H2O  is the correct (balanced) answer not what you had posted earlier, which was 2 ClO3- 1 Cl2 + 3 O2. And 4H+ + 4ClO3- 2Cl2 + 5O2 + 2H2O is just the correct answer multiplied by 2...which is redundant.

But I figured out how to get to the answer so all is well in the world.

[/quote]
Sorry Ensign, but Kase is right on this one. Just want to be a swaying vote before you two start bitching at each other.


Re: The "Fuck my life" thread - Badgerman of DOOM - 05-07-2011

uh... you can't have 5/2 of something, in real life or in a formula dude; you need to multiply it out for whole numbers
and yes i know you can have a lone oxygen atom but it's just wholly incorrect to notate as 5/2; either whole numbers (in which case, you need to multiply everything by 2) or notate the lone oxygen (which wouldn't happen) separately


Re: The "Fuck my life" thread - Eightball - 05-07-2011

(05-07-2011, 04:27 PM)Ensign Epic link Wrote: uh... you can't have 5/2 of something, in real life or in a formula dude; you need to multiply it out for whole numbers
Actually, you can. It's a stoichiometric coefficient; you're not actually stating that the mechanism uses half a molecule. It's just there to convey mole ratios.


Re: The "Fuck my life" thread - Badgerman of DOOM - 05-07-2011

(05-07-2011, 04:36 PM)Eightball link Wrote: [quote author=Ensign Epic link=topic=3709.msg205684#msg205684 date=1304803672]
uh... you can't have 5/2 of something, in real life or in a formula dude; you need to multiply it out for whole numbers
Actually, you can. It's a stoichiometric coefficient; you're not actually stating that the mechanism uses half a molecule. It's just there to convey mole ratios.
[/quote]

so it's a molar equation now and not molecular?


Re: The "Fuck my life" thread - KarthXLR - 05-07-2011

Revenge of the Nerds - NERDS!


Re: The "Fuck my life" thread - kaese - 05-07-2011

@Karth
Great movie, hilarious.

Anal. chemistry exam tomorrow at 7:45 am. Hooray!


Re: The "Fuck my life" thread - Luinbariel - 05-07-2011

(05-07-2011, 06:27 PM)Käse link Wrote: @Karth
Great movie, hilarious.

Anal. chemistry exam tomorrow at 7:45 am. Hooray!

I read that as "anal exam tomorrow"


Re: The "Fuck my life" thread - rumsfald - 05-07-2011

I don't need an exam to know we have great anal chemistry.


Re: The "Fuck my life" thread - CaffeinePowered - 05-07-2011

About $100 of material went into Atom's backpack, and now I find that I can't sand down the plastic because the sander makes it just hot enough to soften the platic so I can't sand it. Im going out tomorrow to buy a rasp, but Im not sure I could work it down by hand in time.

Thankfully I made a second foam blank which I covered in the sheet plastic tonight and put a test layer of a plaster joining compound over part of it, that I can sand much more easily with a fine grit paper by hand and it will provide a nice smooth surface. To top it off once I prime and paint the stuff, it becomes much less brittle (I put a layer of it of Pies kukri, worked wonders for filling in wood irregularities).


Re: The "Fuck my life" thread - Kirby - 05-07-2011

(05-07-2011, 09:14 PM)Caffeine link Wrote: About $100 of material went into Atom's backpack, and now I find that I can't sand down the plastic because the sander makes it just hot enough to soften the platic so I can't sand it. Im going out tomorrow to buy a rasp, but Im not sure I could work it down by hand in time.

Thankfully I made a second foam blank which I covered in the sheet plastic tonight and put a test layer of a plaster joining compound over part of it, that I can sand much more easily with a fine grit paper by hand and it will provide a nice smooth surface. To top it off once I prime and paint the stuff, it becomes much less brittle (I put a layer of it of Pies kukri, worked wonders for filling in wood irregularities).


Did you get the LED sorted out?


Re: The "Fuck my life" thread - CaffeinePowered - 05-07-2011

(05-07-2011, 09:28 PM)Kirby, the FaNspyPyro link Wrote: [quote author=Caffeine link=topic=3709.msg205715#msg205715 date=1304820883]
About $100 of material went into Atom's backpack, and now I find that I can't sand down the plastic because the sander makes it just hot enough to soften the platic so I can't sand it. Im going out tomorrow to buy a rasp, but Im not sure I could work it down by hand in time.

Thankfully I made a second foam blank which I covered in the sheet plastic tonight and put a test layer of a plaster joining compound over part of it, that I can sand much more easily with a fine grit paper by hand and it will provide a nice smooth surface. To top it off once I prime and paint the stuff, it becomes much less brittle (I put a layer of it of Pies kukri, worked wonders for filling in wood irregularities).


Did you get the LED sorted out?
[/quote]

Im just gonna pick up a resistor tomorrow from Radio Shack or something, should fix the problem


Re: The "Fuck my life" thread - Badgerman of DOOM - 05-07-2011

Why not hand sand it? Doing it yourself may be slower and thus lower friction.

DERP I CANNOT READ, DISREGARD
ACTUALLY NO CAFF YOU CAN DO IT, BELIEVE IN ME WHO BELIEVES IN YOU


Re: The "Fuck my life" thread - A. Crow - 05-08-2011

So, I'm just going to lay this out and you guys tell me how annoyed I should be.  

about three weeks ago, I sent my aunt this email:
Quote:I've mentioned this to <redacted> before, and told her to talk to you and <redacted>, and, I was going to save this for Christmas, but I need a really good holster for the FOB.  Let me explain.  I've got two different leg holsters- a really cheap one and really expensive one.  The cheap one is worthless, just worthless.  The really expensive one is on loan from the army (actually it's the second holster the army has issued me, a Lieutenant Colonel i was roommates with at CRC absconded with the first one).  A leg holster is good for missions (I mean, it's exactly what I want for a tactical situation) but I find it pretty damn annoying when I'm just hanging around the FOB.  Around the FOB, it's form over function- does it annoy me to walk around with it?  Does it add 5 extra steps to going to the bathroom?  So, I haggled a hadji down to $5 for a leather belt holster, and like most of the stuff you buy from hadji, it's a piece of crap.  I give it another two weeks before it falls apart.  But after trying on some shoulder holsters and discovering I don't like them, I think I'm ready to get a really nice looking, good quality leather belt holster.  I'm sure somewhere around there is a saddle shop that makes a decent holster.  I'm not thinking minimalist holster here- there's nothing "conceal and carry'ish" about anything I do here.  You've got my check book, see what you can find, pictures are encouraged.  You can get me a belt with a nameplate on it while you're at it.  As far as care packages- I've got pretty much all I need, and I usually hit up <redacted> for Life Support items - razors, deodorant, etc, so send me something you'd think would eat up a chuck of my time, as I have an excess of it for the time being.  I'm always bad at thinking of stuff that'd "be nice to have."  Surprise me.  

Sorry for the rant, it's been a slightly annoying day.  Thank you for all the help, effort and support.

I sent this after I had already been looking online for a holster, and the first place I looked was Galls.. their HQ is in town.  So I had already ruled them out.  Today I got a care package with this  How did she get that from the above text?  

This thing is horrible. it sticks out 4" from my body, I'm hitting it on fucking door jams! walking with a normal arm swing is impossible.  I have to sit on the left side of chairs!  The only good thing so far is that my ACU jacket doesn't get bunched up around it. My platoon sergeant looked at it and all he could muster was, "well, at least it has good retention..."

Gah!


Re: The "Fuck my life" thread - Dtrain323i - 05-08-2011

(05-08-2011, 05:40 AM)LT Crow link Wrote: So, I'm just going to lay this out and you guys tell me how annoyed I should be.  

about three weeks ago, I sent my aunt this email:
Quote:I've mentioned this to <redacted> before, and told her to talk to you and <redacted>, and, I was going to save this for Christmas, but I need a really good holster for the FOB.  Let me explain.  I've got two different leg holsters- a really cheap one and really expensive one.  The cheap one is worthless, just worthless.  The really expensive one is on loan from the army (actually it's the second holster the army has issued me, a Lieutenant Colonel i was roommates with at CRC absconded with the first one).  A leg holster is good for missions (I mean, it's exactly what I want for a tactical situation) but I find it pretty damn annoying when I'm just hanging around the FOB.  Around the FOB, it's form over function- does it annoy me to walk around with it?  Does it add 5 extra steps to going to the bathroom?  So, I haggled a hadji down to $5 for a leather belt holster, and like most of the stuff you buy from hadji, it's a piece of crap.  I give it another two weeks before it falls apart.  But after trying on some shoulder holsters and discovering I don't like them, I think I'm ready to get a really nice looking, good quality leather belt holster.  I'm sure somewhere around there is a saddle shop that makes a decent holster.  I'm not thinking minimalist holster here- there's nothing "conceal and carry'ish" about anything I do here.  You've got my check book, see what you can find, pictures are encouraged.  You can get me a belt with a nameplate on it while you're at it.  As far as care packages- I've got pretty much all I need, and I usually hit up <redacted> for Life Support items - razors, deodorant, etc, so send me something you'd think would eat up a chuck of my time, as I have an excess of it for the time being.  I'm always bad at thinking of stuff that'd "be nice to have."  Surprise me.  

Sorry for the rant, it's been a slightly annoying day.  Thank you for all the help, effort and support.

I sent this after I had already been looking online for a holster, and the first place I looked was Galls.. their HQ is in town.  So I had already ruled them out.  Today I got a care package with this  How did she get that from the above text?  

This thing is horrible. it sticks out 4" from my body, I'm hitting it on fucking door jams! walking with a normal arm swing is impossible.  I have to sit on the left side of chairs!  The only good thing so far is that my ACU jacket doesn't get bunched up around it. My platoon sergeant looked at it and all he could muster was, "well, at least it has good retention..."

Gah!

I'm assuming this is for a Beretta M9. Are you looking for something like this?

http://www.unclemikes.com/products/kydex_paddle_holsters.html

It's Kydex instead of leather but it's just a paddle holster so you could slip it on and off at your leisure.


Re: The "Fuck my life" thread - Kirby - 05-08-2011

Taking a trimmings from my plants to get rooting to plant outside for the summer, manage to need to get 3 stitches on my thumb.


sdgfg



That's what I get for using stolen xacto blades.


Had to be my tweezer hand, too. Work is really going to be fun tomorrow.


Re: The "Fuck my life" thread - Kirby - 05-09-2011

Oh man, I get to double post the FML thread in 2 days.


Not only did today really suck because I have 2 stitches in my thumb, but it also really sucked because I now get to pay $170 for an hour of in shop time for my car.

And also because I started today with 3 stitches, but one ripped out. And I bled all over a $7800* classified piece of military hardware that we're making for a company that technically doesn't even exist.

I wonder what RoHS allows for blood concentration in commercial products...


<snicker>




[spoiler]* Price of materials? $125[/spoiler]


Re: The "Fuck my life" thread - Coelit - 05-09-2011

(05-09-2011, 03:31 PM)Kirby, the FaNspyPyro link Wrote: Oh man, I get to double post the FML thread in 2 days.


Not only did today really suck because I have 2 stitches in my thumb, but it also really sucked because I now get to pay $170 for an hour of in shop time for my car.

And also because I started today with 3 stitches, but one ripped out. And I bled all over a $7800* classified piece of military hardware that we're making for a company that technically doesn't even exist.

I wonder what RoHS allows for blood concentration in commercial products...


<snicker>




[spoiler]* Price of materials? $125[/spoiler]
Does this classified material have anything at all to do with potatoes?


Re: The "Fuck my life" thread - Stein - 05-10-2011

(05-09-2011, 05:00 PM)Coelit link Wrote: [quote author=Kirby, the FaNspyPyro link=topic=3709.msg205840#msg205840 date=1304973086]
Oh man, I get to double post the FML thread in 2 days.


Not only did today really suck because I have 2 stitches in my thumb, but it also really sucked because I now get to pay $170 for an hour of in shop time for my car.

And also because I started today with 3 stitches, but one ripped out. And I bled all over a $7800* classified piece of military hardware that we're making for a company that technically doesn't even exist.

I wonder what RoHS allows for blood concentration in commercial products...


<snicker>




[spoiler]* Price of materials? $125[/spoiler]
Does this classified material have anything at all to do with potatoes?
[/quote]
Gonna go ahead and say that Valve hasn't gotten to the military yet.

P.S. Kirby, I know a car guy who's quite reasonable.


Re: The "Fuck my life" thread - Kirby - 05-10-2011

(05-10-2011, 05:28 AM)Stein link Wrote: [quote author=Coelit link=topic=3709.msg205851#msg205851 date=1304978432]
[quote author=Kirby, the FaNspyPyro link=topic=3709.msg205840#msg205840 date=1304973086]
Oh man, I get to double post the FML thread in 2 days.


Not only did today really suck because I have 2 stitches in my thumb, but it also really sucked because I now get to pay $170 for an hour of in shop time for my car.

And also because I started today with 3 stitches, but one ripped out. And I bled all over a $7800* classified piece of military hardware that we're making for a company that technically doesn't even exist.

I wonder what RoHS allows for blood concentration in commercial products...


<snicker>




[spoiler]* Price of materials? $125[/spoiler]
Does this classified material have anything at all to do with potatoes?
[/quote]
Gonna go ahead and say that Valve hasn't gotten to the military yet.

P.S. Kirby, I know a car guy who's quite reasonable.
[/quote]


Do you have another who has a time machine?


$60 of that was plugs and wires, btw. I had them done while it was in the shop anyway.