Hello There, Guest! Register

Fan problems from... what?
Chief
BRB, Posting
*

Posts: 2,216
Joined: Jul 2008
#1
09-11-2015, 10:47 PM

Okay so I posted this on GameSurge a day or two ago because my BIOS was saying there was CPU Fan Errors or something, Hek said it might be related to my CPU fan going out, but it seemed to be fine. I played MGSV right after too and my CPU temp never rose above 38C so I thought things were fine, but now SpeedFan readings are showing some pretty weird stuff:

[Image: 7a8Dqpz.png]  [Image: YXxHWpI.png]

CPU fan's RPM is in the 1000s and a Sys and Aux fan never seems to go above 500. My original thought is that it might have something to do with my PSU as I recall this only beginning to happen after a power surge while I was playing MGSV this past weekend.

Any ideas and steps I need to take?



Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#2
09-11-2015, 11:53 PM

Doctor says bushing in your stock Hyper 212 fan is dying.

Replace with 120mm PWM fan, like an ugly-ass Noctua NF-S12A
Reply
StolenToast
BRB, Posting


Posts: 1,136
Joined: Jan 2012
#3
09-12-2015, 10:46 AM

(09-11-2015, 11:53 PM)HeK Wrote: Doctor says bushing in your stock Hyper 212 fan is dying.

Replace with 120mm PWM fan, like an ugly-ass Noctua NF-S12A

Yeah, fans go bad too.  But first, do you actually hear the CPU fan going harder than the rest?  Can you listen to the fan as it goes up and down and track the sound with the graph?


[Image: MNON0Oe.png][Image: tumblr_m360cgh8CN1rui512o1_400.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif][Image: 1251089773538.gif]
Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#4
09-12-2015, 10:55 AM

I did some troubleshooting with Chief over steam. He reported a ticking sound, which we sourced to the CPU fan. Typical sign of a failing bushing or sleeve-bearing.

During POST, the cpu fan is supplied a certain voltage via PWM, in this case it's low (some use full voltage) and since there is more resistance inside the fan than normal, it wasn't spinning as it should and thus the low-speed error.
Once booted, the Q-Fan or whichever variable fan speed system would ramp up the voltage as needed to keep the system cool, thus the fan appears to be working within spec.

The graph isn't too weird, as it's a slow sample rate and an inaccurate source. You'll easily see +/- 150 rpm with any fan sensor if not more.
Reply
Chief
BRB, Posting
*

Posts: 2,216
Joined: Jul 2008
#5
09-19-2015, 01:31 PM

Update: apparently my computer is failing to "overclock" every once in a while. Not sure what's causing it - sometimes my computer starts up just fine, sometimes it powers up and down and give me that message



Reply
FlyingMongoose
Uninstalling


Posts: 2,633
Joined: Apr 2008
#6
09-19-2015, 02:27 PM

(09-19-2015, 01:31 PM)TheDarkChief Wrote: Update: apparently my computer is failing to "overclock" every once in a while. Not sure what's causing it - sometimes my computer starts up just fine, sometimes it powers up and down and give me that message

Is it an Intel or AMD chip and which one?


[Image: b_350_20_323957_202743_F19A15_111111.png]
Reply
Chief
BRB, Posting
*

Posts: 2,216
Joined: Jul 2008
#7
09-19-2015, 05:31 PM

(09-19-2015, 02:27 PM)FlyingMongoose Wrote:
(09-19-2015, 01:31 PM)TheDarkChief Wrote: Update: apparently my computer is failing to "overclock" every once in a while. Not sure what's causing it - sometimes my computer starts up just fine, sometimes it powers up and down and give me that message

Is it an Intel or AMD chip and which one?

intel i7-2600k



Reply
FlyingMongoose
Uninstalling


Posts: 2,633
Joined: Apr 2008
#8
09-19-2015, 05:32 PM

that cpu should be overclockable without much issue,... are there any logs generated (it's rare overclockers can do that)


[Image: b_350_20_323957_202743_F19A15_111111.png]
(This post was last modified: 09-19-2015, 05:39 PM by FlyingMongoose.)
Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#9
09-19-2015, 07:33 PM

What is producing that error message? Windows or the BIOS?
What is the make and model of your Motherboard and the version of the bios?
Reply
Chief
BRB, Posting
*

Posts: 2,216
Joined: Jul 2008
#10
09-20-2015, 12:41 PM

http://imgur.com/bIcRFh5

http://imgur.com/R3MkRpP

Two pics which should explain last few questions I hope



Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#11
09-20-2015, 01:46 PM

I would start by updating the BIOS to a more recent version: https://www.asus.com/ca-en/Motherboards/..._Download/
v0906 is eleven revisions behind the current.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)